Oki B412dn User Manual - page 486
For the USB Connection
You can select one of the following installation methods.
Recommended Install: Installs recommended printer drivers automatically
Custom Install: Installs printer drivers you select to install
You can install printer drivers collectively.
Note
Do not remove and reconnect the USB cable during printing operation.
Do not remove and reconnect the USB cable with a short interval of time.
Wait at least 5 seconds to reconnect the USB cable after it has been removed.
Simultaneous connection to all the other USB devices is not guaranteed.
When multiple printers of the same model are connected, they are displayed in the printer folder as "****", "**** (copy 1)", and
"**** (copy 2)" (**** indicates the model name). The numbers assigned vary depending on the order that printers are connected
or turned on.
When using a USB hub, connect the printer to a USB hub directly connected to the computer.
The actual printer driver may be different from the descriptions in this manual due to upgrades.
You must log in as the administrator.
Memo
Use a USB 2.0 interface cable not longer than 5 m (2 m or shorter recommended).
Installing Software with Recommended Install
Installing Software You Want to Use with Custom Install
Installing Software with Recommended Install
1.
Check that the printer is turned off and the USB cable is unplugged from the computer.
2.
Turn the computer on.
Insert the "Software DVD-ROM" into a computer.
3.
When [AutoPlay] is displayed, click [Run Setup.exe].
Memo
If the [User Account Control] dialog box is displayed, click [Yes].
4.
Select a language from the drop-down list.
5.
Read the license agreement, and then click [Agree].
485