Oki B412dn User Manual - page 554
About Administrator Menu Items and Functions in the Printer (BOOT MENU)
You can enable or disable each category, and set other settings. Disabled categories are not displayed.
1.
Turn the printer off.
2.
Turn on the printer while pressing (OK).
3.
Press (OK).
4.
Enter the administrator password.
The factory default password is "aaaaaa".
5.
Press or to display an item to set, and then press (OK).
6.
Change the setting, and then press (OK).
[*] is added to the right side of the setting.
7.
Press
(ONLINE) to switch to [READY TO PRINT].
Item
Setting
Default
setting
Description
WIRELESS MODULE
ENABLE
DISABLE
DISABLE
Sets whether to enable or disable the wireless LAN module.
SIDM MENU
SIDM MANUAL
ID#
0 to 9
2
Sets # that specifies a manual feed tray with the FX/PPR paper source
specification command.
SIDM
MANUAL2 ID#
0 to 9
3
Sets # that specifies a manual2 feed tray with the FX/PPR paper source
specification command.
SIDM MP TRAY
ID#
0 to 9
4
Sets # that specifies the MP tray with the FX/PPR paper source
specification command.
SIDM TRAY1
ID#
0 to 9
1
Sets # that specifies Tray 1 with the FX/PPR paper source specification
command.
SIDM TRAY2
ID#
0 to 9
5
Sets # that specifies the second tray unit with the FX/PPR paper source
specification command.
This is displayed only if the optional second tray unit is installed.
MENU LOCKOUT
ENABLE
DISABLE
DISABLE
Sets whether to enable or disable the MENU LOCKOUT function.
If ENABLE is set, the menus other than [STORED JOB] are hidden.
PANEL LOCKOUT
MODE1
MODE2
OFF
OFF
Sets whether to enable or disable the PANEL LOCKOUT function.
MODE1: Only the ONLINE, OK, CANCEL, and POWER SAVE buttons are
enabled.
MODE2: Only the ONLINE and OK buttons are enabled.
OFF: All the buttons are enabled.
MENU OPERATION
SETUP
UP/DOWN KEY NORMAL
TYPE
OLD TYPE
NORMAL
TYPE
Sets the operation of and
on the operator panel.
NORMAL TYPE :
displays the previous item.
displays the next item.
OLD TYPE :
displays the next item.
displays the previous item.
553