Oki B412dn User Manual - page 247
If Setup is Not Possible through USB Connection (Windows)
If a printer icon is not created in the [Printer] folder
A printer icon is created in the [Printer] folder but printing is not possible
If the "Install Printer Driver Failed" error message is displayed in the Setup Program
If a printer icon is not created in the [Printer] folder
The printer driver is not set up correctly. Set up the printer driver again.
Installing Printer Drivers in a Computer
A printer icon is created in the [Printer] folder but printing is not possible
The port for the print destination is not set correctly with the printer driver. Check the settings as follows:
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the [OKI B432] icon, and then select [B432(*)] from [Printer properties].
* Select a printer driver type to use.
3.
Set an item in the list on the [Ports] tab to the following value.
For connection with a USB cable
[USBxxx]
Note
If [USBxxx] is not displayed in the list, check that the printer is turned on, re-connect the USB cable, and then perform steps 1
to 3 again.
If the "Install Printer Driver Failed" error message is displayed in the Setup Program
You must set up the printer driver by using Plug-and-Play. Check that you set up the printer driver by taking the following procedure:
1.
Check that the printer and computer are turned off.
2.
Connect a USB cable.
3.
Turn the printer on.
4.
Start the computer.
5.
When "Add New Hardware Wizard" is displayed, follow the on-screen instructions to perform the setup
operation.
Note
For details, refer to "README.TXT" in the "Software DVD-ROM".
Other Cases
Symptom
Solution
Reference
The computer does not support the USB
interface.
Check that the USB controller is displayed in
Device Manager.
-
It is possible that the USB cable does
not meet the standard.
Use a USB 2.0 cable.
-
The interface is disabled.
Set [USB] to "ENABLE" in the printer's menu
settings.
The setup procedure is incorrect.
Perform the setup procedure from the beginning
again.
-
The USB cable is disconnected.
Insert the USB cable.
Connecting a Computer to the Printer
246