Oki B412dn User Manual - page 293
PRINT STATISTICS
You can set whether to enable or disable usage report printing, whether to clear the counter in the report, and other settings. To enter
this menu, the administrator password is required.
1.
Press or on the operator panel to display [PRINT STATISTICS], and then press (OK).
2.
Enter the administrator password.
The factory default password is "0000".
3.
Press (OK).
4.
Press or to display the item you want to set, and then press (OK).
5.
Press or to display the target value.
6.
Change the setting, and then press (OK).
[*] is added to the right side of the set value.
7.
Press
(ONLINE) to switch to [READY TO PRINT].
Item
Factory default setting
Description
USAGE REPORT
ENABLE
Enable/Disable the Usage Report.
SUPPLIES REPORT
DISABLE
Enable/Disable the Supplies Report.
RST MAIN CNT
-
Resets the main counter.
RST SUPPLIES CNT
-
Resets the consumables replacement counter.
CHANGE PASSWORD
NEW PASSWORD
-
Changes the password.
VERIFY PASSWORD
-
292