Oki B412dn User Manual - page 279
entering Power Save, Sleep or Deep Sleep mode.
The printer may be cleaning the image
drum.
Wait for a while.
-
The printer is adjusting the temperature
of the fuser unit.
Wait for a while.
-
The printer is processing data from
another interface.
Wait until printing is completed.
-
Printing stops
halfway.
The temperature inside the printer rises
due to continuous printing for a long
time, resulting in the temperature being
adjusted.
Wait for a while.
When the printer reaches the suitable temperature,
printing restarts automatically.
-
Free space in
memory is
insufficient.
The print data is complicated.
Simplify the print data.
-
All pages are not
printed.
The WSD port is used.
Change the print port to Standard TCP/IP Port.
-
Printing is slow.
Printing process is also processed in the
computer.
Use a computer with faster processing speed.
-
The print data is complicated.
Simplify the print data.
-
The printer driver is
not correctly
displayed.
The printer driver may not be operating
correctly.
Uninstall the printer driver, and then install it
again.
The printer turns off
automatically.
If the printer is not used for a certain
period of time (the factory default is
4 hours), the printer turns off
automatically. This function is called
Auto Power Off.
Press or
on the operator panel to select
[ADMIN SETUP] > [POWER SETUP] > [AUTO PW
OFF], and then set Auto Power Off to [DISABLE].
278