Oki B412dn User Manual - page 238
If the Problem Still Persists
Windows Vista
1.
Select [Start] > [Control Panel] > [View network status and tasks] > [Manage network connections].
2.
Double-click [Local Area Connection], and then click [Properties] on the [Local Area Connection Status]
screen.
3.
When the [User Account Control] screen is displayed, click [Yes].
4.
Check that [Internet protocol version 4 (TCP/IPv4)] is displayed.
5.
Click [Property] in [Internet protocol version 4 (TCP/IPv4)], and then check that the values for [IP
Address], [SUBNET MASK], and [Default Gateway] are correct.
When you specify the printer's IP address during setup, do not assign "0" to the beginning of each octet. Set, for example, as
"192.169.1.2". If the address is set as "192.169.001.002", data cannot be printed correctly. This is due to the Windows Vista
specifications.
6.
In the [Printers] folder, right-click the icon for the printer you are using, select [Property], click
[Configure Port] on the [Ports] tab, and then check that the value for [Printer Name or IP Address]
matches the printer's IP address.
For a small network, set as follows:
[IP Address]
Windows 192.168.0.3
Printer 192.168.0.2
[SUBNET MASK]
Windows 255.255.255.0
Printer 255.255.255.0
[Gateway]
Windows Not used
Printer 0.0.0.0
Windows Server 2003
1.
Select [Start] > [Control Panel] > [Network Connections].
2.
Check that [Internet Protocol (TCP/IP)] is displayed in [Property].
3.
Click [Property] in [Internet Protocol (TCP/IP)], and then check that the values for [IP Address],
[SUBNET MASK], and [Default Gateway] are correct.
When you specify the printer's IP address during setup, do not assign "0" to the beginning of each octet. Set, for example, as
"192.169.1.2". If the address is set as "192.169.001.002", data cannot be printed correctly. This is due to the Windows Server
2003 specifications.
4.
In the [Printers] folder, right-click the icon for the printer you are using, select [Property], click
[Configure Port] on the [Ports] tab, and then check that the value for [Printer Name or IP Address]
matches the printer's IP address.
5.
On the "OKI LPR Utility" screen, select a printer in use, select [Remote Print] > [Confirm Connections],
and then check that the value for [IP Address] matches the printer's IP address.
If the "Queue Status" of OKI LPR Utility is "Paused", select the stopped printer, and then clear the [Pause] check box in [Remote
Print].
For a small network, set as follows:
[IP Address]
237