Oki B412dn User Manual - page 463
Other manuals for B412dn:
Maintenance Manual
of
637
Using the Web page of the Printer
15.
Press or to display [EXECUTE], and then press (OK).
16.
If the displayed content is the same as that you checked in step 1, press (OK).
Memo
The encryption key varies depending on the wireless LAN access point or security.
It takes approximately 30 seconds for the printer to detect the wireless LAN access point.
This completes the setup of the wireless LAN.
If the printer cannot detect the specified wireless LAN access point, [CONNECT FAILED] is displayed. In such a case, the specified
wireless LAN access point may not be operating properly, or the entered information (the SSID, encryption method, and encryption
key) may be wrong. Check.
Topics
Checking That Connection is Established Correctly
462