Oki B412dn User Manual - page 296
WIRELESS SETTING
Set a wireless LAN. To enter this menu, the administrator password is required.
1.
Press or on the operator panel to display [WIRELESS SETTING], and then press (OK).
2.
Enter the administrator password.
The factory default password is "aaaaaa".
3.
Press (OK).
4.
Press or to display the item you want to set, and then press (OK).
5.
Press or to display the target value.
6.
Change the setting, and then press (OK).
[*] is added to the right side of the set value.
7.
Press
(ONLINE) to switch to [READY TO PRINT].
Item
Factory default
setting
Description
WPS SETUP
WPS-PBC
-
Runs WPS-PBC.
WPS-PIN
-
Runs WPS-PIN.
WIRELESS
SELECTION
"A list of access points' names found in
the search"
-
Displays a list of access point names found in
the search.
MANUAL SETUP SSID
-
Enter an SSID.
SECURITY
DISABLE
Selects the security of the wireless LAN
function.
"WPA2-EAP" can be set only on the Web page.
WPA ENCRYPTION TYPE AES
Selects a WPA2-PSK encryption type.
Displayed when [SECURITY] is "WPA2-PSK".
WPA PRE-SHARED KEY
-
Enter the Pre Shared Key.
Displayed when [SECURITY] is "WPA2-PSK".
EXECUTE
-
Executes the changes made to the security
settings.
RECONNECTION
-
Executes the reconnection of wireless
connection.
295