Oki B412dn User Manual - page 381
For Mac OS X (Panel Language Setup)
You can change the display language used on the operator panel.
About the Operating Environment
1.
Print a menu map of the printer.
Check the "Language format" number that is printed on the menu map.
If you are using a TCP/IP connection, check the printer's IP address on the menu map.
How to check the menu map
Checking from the Operator Panel
2.
Insert the "Software DVD-ROM" into a computer.
3.
Double-click [Utility] > [Panel Language Setup] > [Panel Language Setup].
4.
Select a connection method.
Select [USB] or [TCP/IP]. If you select TCP/IP connection, enter the printer's IP address that you checked on the menu map.
5.
Click [OK].
A main dialog box appears.
6.
Check that the "Language Format" value on the menu map and the value displayed on the screen meet
the following conditions.
Condition 1: The first numbers of the versions match.
Condition 2: The Language version value that is displayed on the screen is equal to or newer (greater) than the "Language Format"
value.
Memo
If Condition 1 is not met, the language set cannot be downloaded. If you attempt downloading with Condition 1 not being met,
an error is displayed on the operator panel. To clear the error, restart the printer. If Condition 1 is met but Condition 2 is not
met, you can use the printer but the names of some settings are displayed in English.
7.
Select a language.
8.
Click [Download].
The language setup file is sent to the printer, and a message indicating the completion of the transmission is displayed.
9.
Restart the printer.
380