Oki B412dn User Manual - page 190
About Paper Output
Output stacker
Supported paper type
Capacity
Facedown stacker
Plain paper
150 sheets (if paper weight is 80 g/m
2
)
Faceup stacker
Plain paper
Hagaki
Envelope
Label
100 sheets (if paper weight is 80 g/m
2
)
10 sheets (thick paper and envelopes)
When performing duplex printing, paper is output to the facedown stacker.
Note
Do not open or close the faceup stacker during printing. Paper jams may result.
Outputting with the Print Side Down (Facedown Stacker)
Outputting with the Print Side Up (Faceup Stacker)
Outputting with the Print Side Down (Facedown Stacker)
Paper is output with the print side down.
Papers are output to and stacked in reverse order of printing on the top cover.
Up to 150 sheets of paper with a paper weight of 80 g/m
2
can be stacked.
Note
Check that the faceup stacker on the rear side of the printer is closed. If the faceup stacker is opened, paper is always output to the
faceup stacker.
Memo
Open the paper support to prevent output paper from sliding off the top cover.
Outputting with the Print Side Up (Faceup Stacker)
Paper is output with the print side up.
Papers are output to and stacked in reverse order of printing on the faceup stacker.
Up to 100 sheets of paper with a paper weight of 80 g/m
2
can be stacked.
Note
189