Oki B412dn User Manual - page 445
If the information about Tray 2 is not displayed in the menu map correctly, repeat the procedure from step 1.
Setting the Printer Driver
Check the type of the printer driver that is installed in your computer, and then refer to the corresponding description.
Note
To follow this procedure, you must log in to a computer as the administrator.
You must register the printer driver in the computer in advance.
Installing Printer Drivers in a Computer
Setting Tray 2 (Optional) to the Windows PCL Printer Driver
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the [OKI B432] icon, and then select the printer driver to be used from [Printer properties].
3.
Enter [2] for [Installed Paper Trays] on the [Device Options] tab, and then click [OK].
Memo
If a TCP/IP network connection is used, click [Get Printer Settings] to set the driver automatically.
Setting Tray 2 (Optional) to the Windows PS Printer Driver
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the [OKI B432] icon, and then select the printer driver to be used from [Printer properties].
3.
Select [Get installed options automatically] for [Installable Options] on the [Device Settings] tab, and
then click [Setup].
When using a USB connection, select [2] for [Available Trays] in [Installable Options].
444