Oki B412dn User Manual - page 560
Limiting by Using MAC Addresses (MAC Address Filtering)
You can control access to the printer by using MAC addresses. You can allow for or reject access from a specified MAC address.
Note
Be sure to specify the correct MAC address. An incorrect entry of a MAC address does not allow for access to the printer from a
network. Use care when setting.
Memo
You can set this setting with the Web page.
The description below uses the following environment as an example.
Printer: B432dn
IP address of the printer: 192.168.0.2
1.
Open the Web page of the printer.
About the IP Address of the printer
How to log in to the Web page
About the Web Page of the Printer
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of the Printer
3.
Select [Admin Setup].
4.
Select [Network Setup] > [Security] > [Select MAC Address Filtering].
5.
Set [Select MAC Address Filtering] to [Enable] in [STEP1. Select MAC Address Filtering Settings].
559