Oki B412dn User Manual - page 350
printer trap
Item
Factory
default
setting
Description
Web page Configuration
Tool/Network
Setting plug-in
Network
Card Setup
(Mac OS X)
Printer
Trap
Community
Name
-
-
public
Sets the community name for Printer Trap. You can use up to 31 alphanumeric
characters.
Trap
Enable #1
- 5
-
-
DISABLE Sets whether to use Printer Trap for TCP #1-5.
Printer
Reboot #1
- 5
-
-
DISABLE Selects whether to send an SNMP message when the printer is restarted.
Receive
Illegal
Packet #1
- 5
-
-
DISABLE Sets whether to use Trap when accessing the printer by a community name
that is different from that specified in "Printer Trap Community Name".
Online #1
- 5
-
-
DISABLE Sets whether to send an SNMP message whenever the printer is ON-LINE.
Offline #1
- 5
-
-
DISABLE Sets whether to send an SNMP message whenever the printer is OFF-LINE.
Paper Out
#1 - 5
-
-
DISABLE Selects whether to send an SNMP message when the printer runs out of paper.
Paper Jam
#1 - 5
-
-
DISABLE Selects whether to send an SNMP message when there is a paper jam in the
printer.
Cover
Open #1 -
5
-
-
DISABLE Selects whether to send an SNMP message whenever the printer cover is
opened.
Printer
Error #1 -
5
-
-
DISABLE Selects whether to send an SNMP message when an error occurs in the printer.
Address
#1 - 5
-
-
0.0.0.0
Sets the address to which to send Trap in the case of using TCP/IP. Enter a
value in "***.***.***.***" format by using decimal numbers. If the IP address
is 0.0.0.0, Trap is not sent. You can register up to five addresses.
349