Oki B412dn User Manual - page 357
MAC Address Filtering
Item
Factory
default
setting
Description
Web page
Configuration
Tool/Network
Setting plug-
in
Network
Card Setup
(Mac OS X)
MAC Address
Filtering
-
-
DISABLE
Enables/Disables the function that controls access based on MAC address.
However, this function requires sufficient knowledge about MAC addresses.
For general use, be sure to set this setting to DISABLE.
If you set this setting to ENABLE, network access becomes completely
unavailable unless the following settings are set.
Communication
from the
following MAC
Addresses
-
-
ACCEPT
Sets whether to permit access from a MAC address set in MAC Address
Access#1-50.
Filtering MAC
Address #1-50
-
-
00:00:00:
00:00:00
Specifies the MAC address to which to permit (deny) access to the printer.
Entering 00:00:00:00:00:00 disables the restriction.
Administrator's
MAC Address
setting
-
-
00:00:00:
00:00:00
Specifies the administrator's MAC address.
This address can always access the printer. However, if the administrator is
using settings that enable access to the printer via a proxy, the proxy
address is applied. If the proxy address is applied, anyone accessing via the
proxy is permitted access to the printer.
It is ideal that the administrator access the printer without going through a
proxy.
356