Oki B412dn User Manual - page 584
Connecting the Printer to the Authentication Network by Using IEEE802.1X
The printer supports the IEEE802.1X authentication. You can set the printer by using this authentication function so that the printer that
is connected to a network can be accessed only from specified computers.
You can set this setting on the Web page.
Note
The setting may not work properly depending on your network environment.
Procedure for Setting Up IEEE802.1X
This sections describes the procedure for setting up IEEE802.1X to the printer.
EAP authentication must be performed after computer connection is authenticated by enabling IEEE802.1X. This section describes how
to set PEAP, which is an EAP authentication type.
EAP authentication must be performed after computer connection is authenticated by enabling IEEE802.1X. This section describes how
to set EAP-TLS, which is an EAP authentication type.
583