Oki B412dn User Manual - page 200
Setting Auto Power Off
When the printer is connected to a network, set the following settings to apply Auto Power Off.
Enabling Auto Power Off
1.
Press or on the operator panel several times until [ADMIN SETUP] is displayed, and then press
(OK).
2.
Press or , enter the administrator password, and then press (OK).
The factory default password is "aaaaaa".
3.
Press or several times until [POWER SETUP] is displayed, and then press (OK).
4.
Display [AUTO PW OFF], and then press (OK).
5.
Press or to select [ENABLE], and then press (OK).
[*] is added to the right end of the set value.
6.
Press
(ONLINE) to switch to [READY TO PRINT].
Setting the Transition Time
1.
Press or on the operator panel several times until [MENUS] is displayed, and then press (OK).
2.
Press or several times until [SYSTEM ADJUST] is displayed, and then press (OK).
3.
Press or several times until [AUTO PW OFF TIME] is displayed, and then press (OK).
4.
Press or to select the transition time, and then press (OK).
[*] is added to the right end of the set value.
Available transition time settings
1 HOURS,
2 HOURS,
3 HOURS,
4 HOURS*,
8 HOURS,
12 HOURS,
18 HOURS,
24 HOURS
* indicates the factory default setting.
5.
Press
(ONLINE) to switch to [READY TO PRINT].
199