Oki B412dn User Manual - page 623
4.
Press or to select [OTHERS SETUP], and then press (OK).
5.
Press or to select [FLASH SETUP], and then press (OK).
6.
Press or to select [FORMATTING], and then press (OK).
7.
Select [PCL], [COMMON], or [PS], and then press (OK).
8.
When [ARE YOU SURE?] is displayed, check that [YES] is flashing, and then press (OK).
9.
When [EXECUTE NOW?] is displayed, check that [YES] is flashing, and then press (OK).
[OFFLINE] is displayed, and the specified flash memory area is initialized.
When initialization is complete, [REBOOTING 2] is displayed and the printer automatically restarts.
Initialization takes 1 to 2 minutes.
Topics
Alternatively, you can initialize from the Storage Manager plug-in in Configuration Tool.
Setting the Storage Manager Plug-in
622