Oki B412dn User Manual - page 519
Setting to Send an E-mail from the Printer
You can set failure notification settings by using the Web page.
Memo
If you specify a domain name in [SMTP Server], set the DNS server in the [TCP/IP] setting.
You must set the mail server to allow the printer to send an E-mail. For details on the mail server setting, contact your network
administrator.
If you use Internet Explorer, set the following before you send a test mail.
In the Web browser, select [Tools] > [Internet options], and then click [Custom level] on the [Security] tab. Then, select [Enable]
in [Allow websites to prompt for information using scripted windows].
1.
Open the Web page of the printer.
About the IP Address of the printer
How to log in to the Web page
About the Web Page of the Printer
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of the Printer
3.
Click [Network Setup] on the [Admin Setup] tab.
4.
Select [Email] > [Send Settings].
5.
Set [SMTP Send] to [Enable] in [STEP1. SMTP send settings].
6.
Set the domain name or IP address of the mail server in [SMTP Server] in [STEP2. Send Address
Settings].
7.
Set the E-mail address that is assigned to the printer in [Printer Email Address].
518