Oki B412dn User Manual - page 570
Creating a Certificate
You can create a certificate on the Web page. The following certificates can be created.
Pre-installed Certificate
Self-signed certificate
Authority-issued certificate (creation of CSR)
Note
Before you create a certificate, be sure to delete the pre-installed certificate.
If you change the IP address of the printer after creating the certificate, the certificate becomes invalid. Be sure not to change the
IP address of the printer after creating the certificate.
Using a Certificate That You Signed
Using a Certificate That The Certificate Authority Issued
Using a Certificate That You Signed
1.
Open the Web page of the printer.
About the IP Address of the printer
How to log in to the Web page
About the Web Page of the Printer
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of the Printer
3.
Select [Admin Setup].
4.
Select [Network Setup] > [Security] > [SSL/TLS].
5.
Select [Using self-signed Certificate] in [STEP1. Select Certificate type].
569