Oki B412dn User Manual - page 369
Other manuals for B412dn:
Maintenance Manual
of
637
Setting the IP address
Note
As initial value, the IP address acquisition method is set to "Auto".
If there is a DHCP server on the network, the IP address obtained from the server is displayed.
1.
Start Network Card Setup.
2.
Select a printer from the list.
3.
Select [IP Address] from the [Printer] menu.
4.
Change the settings as necessary, and then click [Save].
5.
Enter the password, and then click [OK].
The factory default password is the last six digits of the MAC address.
The password is case sensitive.
The printer network card restarts.
368