Oki B412dn User Manual - page 578
15.
Click [Printer Test Page] on the [General] tab.
If a test page is printed, the setup is complete.
Setting the Printer as the IPP Printer in a Mac OS X Environment
Add the printer to a computer as an IPP printer.
1.
Insert the "Software DVD-ROM" into a computer, and then install the printer driver.
About the Included Utility Software
2.
Select [System Preferences] from the Apple menu.
3.
Click [Print & Scan].
4.
Click [+].
5.
Click the [IP] tab.
6.
Select [IPP (Internet Printing Protocol)] from [Protocol].
7.
Enter the IP address of the printer in [Address].
8.
Enter "ipp/lp" in [Queue].
9.
Click [Add].
10.
Check that the printer is registered in [Print & Scan].
Performing IPP Print
The following procedure uses Notepad as an example. The descriptions may vary depending on your application.
1.
Open a file to print.
2.
Select [Print] from the [File] menu.
3.
Select the created IPP printer from [Printer], and then click [Print].
577