Oki B412dn User Manual - page 525
Setting to Send an E-mail Only If an Error Occurs
1.
Open the Web page of the printer.
About the IP Address of the printer
How to log in to the Web page
About the Web Page of the Printer
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of the Printer
3.
Click [Network Setup] on the [Admin Setup] tab.
4.
Select [Email] > [Alert Settings].
5.
Enter an E-mail address to receive a failure notification.
6.
Click [Setting] of the entered E-mail address.
Memo
If you want to apply the notification conditions to another address, click [Copy]. This is useful when you want to set the similar
failure conditions to multiple destinations.
7.
Select [Upon occurrence of an event], and then click [To STEP2].
8.
Select a check box of a failure type for notification in [Setting Events Used for Sending Email Alerts].
524