Oki B412dn User Manual - page 36
Printing on Labels
First, load the labels in the MP tray, and then register the paper settings in the printer. Next, start an application, and then set the
printing settings with the printer driver.
Note
Printing on labels is not possible from Tray 1 and Tray 2 (optional). They are printed from the MP tray.
Printing speed is slow.
Jobs are automatically discarded when the time taken to load the paper exceeds the manual timeout time (factory default setting
is one minute) set from the system configuration menu.
The PS printer driver is not available with B412.
For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PS Printer Driver
For Mac OS X PCL Printer Driver
Loading Labels
1.
Load labels in the MP tray.
2.
Open the faceup stacker on the rear side of the printer.
3.
Press on the operator panel to display [MENUS], and then press (OK).
[TRAY CONFIG] is displayed.
4.
Press (OK) to display [MP TRAY CONFIG].
5.
Press (OK) to display [MEDIATYPE].
6.
Press (OK) to make [PLAIN] flash.
7.
Press or to display [LABELS].
8.
Press (OK) to add [*] to the right side of the set value.
9.
Press or to display [MEDIAWEIGHT], and then press (OK).
[MEDIUM] flashes.
10.
Press or to display [HEAVY].
11.
Press (OK) to add [*] to the right end of the set value.
12.
Press
(ONLINE) to select [READY TO PRINT].
Next, set printing settings from a printer driver.
For Windows PCL Printer Driver
1.
Select [Page Setup] from the [File] menu.
2.
Select [A4] or [Letter] for [Size], and [Portrait] or [Landscape] for [Orientation], and then click [OK].
35