Oki B412dn User Manual - page 482
11.
Click [x] in the upper right of the [Setup] window to close it.
12.
Click [Start] from the Windows menu, and then select [Devices and Printers].
13.
Check that the [OKI B432] icon is displayed.
Right-click the [OKI B432] icon, select printer properties, and then check that all printer drivers are displayed in the sub menu.
14.
Remove the "Software DVD-ROM" from the computer.
15.
Perform a test print from the computer.
Memo
To perform a test print, click [Start] from the Windows menu, right-click the [OKI B432] icon in the [Devices and Printers]
window, select [Printer properties] > [OKI B432(*)] > [General] tab, and click [Print Test Page].
* Select a printer driver type by which you want to perform a test print.
Installing Software You Want to Use with Custom Install
With Custom Install, you can select the printer driver to use from the following printer drivers.
PCL printer driver
PS printer driver
XPS printer driver
Note
The PS printer driver is not available with B412.
1.
Check that the printer and a computer are connected and the printer is turned on, and then insert the
"Software DVD-ROM" into the computer.
2.
When [AutoPlay] is displayed, click [Run Setup.exe].
Memo
If the [User Account Control] dialog box is displayed, click [Yes].
3.
Select a language from the drop-down list.
4.
Read the license agreement, and then click [Agree].
481