Oki B412dn User Manual - page 250
If Configuration Tool has a Problem
[User Setting] tab
Symptom
Cause
Solution
Reference
When using the cloning function,
a copy destination printer is not
displayed on the screen.
The model name of
the copy destination
printer is different.
To clone settings from a printer to another printer, the model
name of these printers must be the same, and if model
names are different, settings cannot be copied.
Check the model name of a copy destination printer.
If multiple printers are specified
as copy destinations, cloning
may fail.
Authentication of the
administrator
password failed.
When cloning settings, you must enter the administrator
password for the printer.
The administrator password is used for authentication to a
copy destination printer.
If a printer is authenticated, settings are copied to the
printer, and if a printer is not authenticated, settings are not
copied to the printer.
Check the administrator password for a printer that is not
authenticated.
[Alert Info] tab
Symptom
Cause
Solution
Reference
Cannot enable an alert on the
"Device Settings (Alert Info)"
screen of the computer.
[Save the Log
setup] in the
printer is
disabled.
Follow the procedure below:
1. Press or
on the operator panel to display
[ADMIN SETUP] > [OTHERS SETUP] > [JOB LOG
SETUP], and then select [ENABLE].
2. Click [Update devices] on the "Device Settings
(Alert Info)" screen of the computer.
249