Oki B412dn User Manual - page 327
Setting the Network Setting Plug-in
The settings for the Network Setting plug-in are displayed when the Network Setting plug-in is installed. You can set the IP address of
your printer, enable or disable device settings, and the display of the Web page.
You can set up a network with Configuration Tool. Before setting up a network, install the Network Setting plug-in.
About how to set a network
Improving Security by Encrypting Communication over a Network
About icons
Note
Only the administrator of the computer can use the Network Setting functions. If you are logged in to Windows with a user account
that is not the administrator account, the Network Setting menu is not displayed.
Searching for the Printer on a Network
Setting the Printer's Network Settings
Changing the Display Order of Printer Information
Searching for the Printer on a Network
You can search for the printer.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Network Setting] from the [Plug-in] menu.
3.
Select [Discover Devices].
The search results are displayed.
4.
Specify the search criteria as necessary, and then click [OK].
Memo
You can enter up to 16 IP addresses.
By selecting the "Search local subnet" check box, you can search for devices that exist on the same segment.
To search for a printer individually, you can add the IP address of the printer you want to find.
5.
Select [Discover Devices].
326