Oki B412dn User Manual - page 89
Switching to Another Paper Feed Tray Automatically When a Tray Runs Out of Paper
If paper of the same paper size and weight is loaded in the paper cassettes (Tray 1 and Tray 2) and the MP tray, prints can be made
from another tray in case the specified tray runs out of paper.
Note
The PS printer driver is not available with B412.
Be sure to set the same values (paper size, media type, media weight) for each tray used for the auto tray switch. Available paper
sizes vary depending on the tray.
About Paper Types That Can be Loaded and Storage Methods
Setting Trays for the Auto Tray Switching
For Windows PCL Printer Driver
For Windows XPS Printer Driver
For Mac OS X PS Printer Driver
For Mac OS X PCL Printer Driver
Setting Trays for the Auto Tray Switching
1.
Press or to display [MENUS], and then press (OK).
[TRAY CONFIG] is displayed.
2.
Press or to display [TRAY CONFIG], and then press (OK).
3.
Press or to display [MP TRAY CONFIG], and then press (OK).
4.
Press or to display [TRAY USAGE], and then press (OK).
5.
Press or to display [NORMAL TRAY].
6.
Press (OK) to add [*] to the right side of the set value.
7.
Press
(ONLINE) to switch to [READY TO PRINT].
Next, set printing settings from a printer driver.
For Windows PCL Printer Driver
1.
Select [Print] from the [File] menu.
2.
Click [Preferences].
3.
Click [Paper Feed Options] on the [Setup] tab.
4.
Select the [Auto] check box for [Paper feed options].
5.
Click [OK].
The [OKI B432(PCL) Advanced Options] screen closes.
6.
Change other settings if necessary, and then click [OK].
The [Printing Preferences] screen closes.
88