Oki B412dn User Manual - page 575
Other manuals for B412dn:
Maintenance Manual
of
637
Enabling Encryption Settings
After creating a certificate, perform the following procedure to enable encryption.
If you enable encryption, communication is encrypted immediately after the settings are changed from the Web page.
1.
Open the Web page of the printer.
About the IP Address of the printer
How to log in to the Web page
About the Web Page of the Printer
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of the Printer
3.
Select [Admin Setup].
4.
Select [Network Setup] > [Security] > [SSL/TLS].
5.
Select [Enable] for the protocol to which apply the encryption.
6.
Click [Submit].
574