Oki B412dn User Manual - page 585
Other manuals for B412dn:
Maintenance Manual
of
637
Procedure for Setting Up IEEE802.1X
Before setting IEEE802.1X to the printer, connect the printer to a computer via a standard hub for preparing the setup. After IEEE802.1X
is set, connect the printer to the authentication switch.
1.
Connect the printer to a computer.
2.
Set the IP address that is used for setting up to a computer.
3.
Set the IP address that is used for setting up to the printer.
About the connection of the printer to a computer and how to set an IP address of the printer
Connecting the Printer to a Network
4.
Complete the setting of IEEE802.1X to the printer.
5.
Connect the printer to the authentication switch.
584