Oki B412dn User Manual - page 324
Setting the Alert Info Plug-in
You can use the Alert Info plug-in to display a message on your computer when a job is complete. As a special term for this software,
completion of a job is called an "event".
Note
The Alert Info plug-in can be used with devices connected to the network.
You must match the time and time zone of the printer and those of the computer by using the SNTP function of the printer.
Basic Settings
You can set the basic settings of the Alert Info plug-in.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Alert Info] from the [Plug-in] menu.
3.
Select [Setup].
4.
Change the setting if necessary.
5.
Click [Update].
Device Settings
The Alert Info plug-in settings can be changed for each device.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Alert Info] from the [Plug-in] menu.
3.
Select [Setting devices].
4.
Click [Update devices].
323