Oki B412dn User Manual - page 603
Registering a Printer to OKI LPR Utility
Add a printer to OKI LPR Utility.
Note
You must have the administrator rights.
If you cannot add a printer, exit OKI LPR Utility, select [Start] > [All Programs] > [Okidata] > [OKI LPR Utility], right-click [OKI
LPR Utility], select [Run as administrator], and then start OKI LPR Utility.
If another user is logged in by using the easy user switch function, a printer cannot be added and deleted.
You cannot set the printer that is already registered in OKI LPR Utility. To change the port, select [Confirm Connections] from
[Remote Print].
1.
Start OKI LPR Utility.
2.
Select [Add Printer] from the [Remote Print] menu.
3.
Select [Printer Name], and then enter the IP address.
Network printers and printers connected to the LPR port are not displayed.
4.
To select a network printer, select [Discover].
5.
Click [OK].
Note
A printer is displayed in [Printer] only if the printer driver is added to the [Printer and Faxes] folder. A printer is not displayed if
the printer driver is set to a network printer.
Memo
To search for an Oki Data printer on a network, click [Discover].
602