H3C LS-3100-52P-OVS-H3 Operation Manual - page 1053
1-14
z
In general, it is not required that clients of a route reflector be fully meshed. The route reflector
forwards routing information between clients. If clients are fully meshed, you can disable route
reflection between clients to reduce routing costs.
z
In general, a cluster has only one route reflector, and the router ID of the route reflector is used to
identify the cluster. You can configure multiple route reflectors to improve network stability. In this
case, you need to specify the same cluster ID for these route reflectors to avoid routing loops.
Displaying and Maintaining MBGP
Displaying MBGP
To do…
Use the command…
Remarks
Display the IPv4 MBGP routing
table
display ip multicast routing-table [ verbose]
Available in
any view
Display the IPv4 MBGP routing
information matching the
specified destination IP
address
display ip multicast routing-table ip-address
[ mask-length | mask ] [ longer-match ]
[ verbose ]
Available in
any view
Display MBGP peer group
information
display bgp multicast group [ group-name ]
Available in
any view
Display the advertised
networks
display bgp multicast network
Available in
any view
Display AS path information
display bgp multicast paths
[ as-regular-expression ]
Available in
any view
Display MBGP peer/peer group
information
display bgp multicast peer [ip-address ]
[ verbose ]
Available in
any view
Display MBGP routing
information
display bgp multicast routing-table
[ ip-address [ { mask | mask-length }
[ longer-prefixes ] ] ]
Available in
any view
Display MBGP routing
information matching the AS
path ACL
display bgp multicast routing-table
as-path-acl as-path-acl-number
Available in
any view
Display MBGP CIDR routing
information
display bgp multicast routing-table cidr
Available in
any view
Display MBGP routing
information matching the
specified BGP community
display bgp multicast routing-table
community [ aa:nn&<1-13> ] [ no-advertise |
no-export | no-export-subconfed ] *
[ whole-match ]
Available in
any view
Display MBGP routing
information matching an MBGP
community list
display bgp multicast routing-table
community-list { basic-community-list-number
[ whole-match ] |
adv-community-list-number }&<1-16>
Available in
any view
Display MBGP dampened
routing information
display bgp multicast routing-table
dampened
Available in
any view