H3C LS-3100-52P-OVS-H3 Operation Manual - page 791
1-14
Configuring IPv6 BGP Soft Reset
Enable route refresh
Follow these steps to enable route refresh:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address
family view
ipv6-family
—
Enable route refresh
peer { ipv6-group-name | ipv6-address }
capability-advertise route-refresh
Optional
Enabled by default.
Perform manual soft-reset
Follow these steps to perform manual soft reset:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—
Save all routes from an IPv6
peer/peer group, not letting
them go through the inbound
policy
peer { ipv6-group-name | ipv6-address }
keep-all-routes
Optional
Not saved by
default.
Return to user view
return
Soft-reset BGP connections
manually
refresh bgp ipv6{all | ipv6-address |
group ipv6-group-name | external |
internal } { export | import }
Required
If the peer keep-all-routes command is used, all routes from the peer/peer group will be saved
regardless of whether the filtering policy is available. These routes will be used to generate IPv6 BGP
routes after soft-reset is performed.
Configuring the Maximum Number of Load-Balanced Routes
Follow these steps to configure the maximum number of load balanced routes:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 address family view
ipv6-family
—