H3C LS-3100-52P-OVS-H3 Operation Manual - page 930
1-8
Task
Remarks
Enabling IGMP
Required
Configuring IGMP Versions
Optional
Configuring Static Joining
Optional
Configuring a Multicast Group Filter
Optional
Configuring Basic Functions
of IGMP
Configuring the Maximum Number of Multicast
Groups on an Interface
Optional
Configuring IGMP Message Options
Optional
Configuring IGMP Query and Response
Parameters
Optional
Adjusting IGMP
Performance
Configuring IGMP Fast Leave Processing
Optional
Enabling SSM Mapping
Optional
Configuring IGMP SSM
Mapping
Configuring SSM Mappings
Optional
Enabling IGMP Proxying
Optional
Configuring IGMP Proxying
Configuring Multicast Forwarding on a
Downstream Interface
Optional
z
Configurations performed in IGMP view are effective on all interfaces, while configurations
performed in interface view are effective on the current interface only.
z
If a feature is not configured for an interface in interface view, the global configuration performed in
IGMP view will apply to that interface. If a feature is configured in both IGMP view and interface
view, the configuration performed in interface view will be given priority.
Configuring Basic Functions of IGMP
Configuration Prerequisites
Before configuring the basic functions of IGMP, complete the following tasks:
z
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
z
Configure PIM-DM or PIM-SM
Before configuring the basic functions of IGMP, prepare the following data:
z
IGMP version
z
Multicast group and multicast source addresses for static group member configuration
z
ACL rule for multicast group filtering
z
The maximum number of multicast groups that can be joined on an interface