H3C LS-3100-52P-OVS-H3 Operation Manual - page 1567
3-4
To do…
Use the command…
Remarks
Set the command that is
automatically executed when a
user logs into the user interface
auto-execute command text
Optional
By default, no command is
automatically executed when a
user logs into a user interface.
Define a shortcut key for
aborting tasks
escape-key { default |
character }
Optional
The default shortcut key
combination for aborting tasks
is < Ctrl + C >.
Make terminal services
available
shell
Optional
By default, terminal services
are available in all user
interfaces.
Set the maximum number of
lines the screen can contain
screen-length screen-length
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information
in pages.
Set the history command buffer
size
history-command max-size
value
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Set the timeout time of the VTY
user interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
user interface is terminated if
no operation is performed in the
user interface within 10
minutes.
You can use the idle-timeout 0
command to disable the
timeout function.
Note that if you configure not to authenticate the users, the command level available to users logging in
to a switch depends on both the authentication-mode none command and the user privilege level
level command, as listed in
Table 3-4
.