H3C LS-3100-52P-OVS-H3 Operation Manual - page 374
2-4
Configuring an Address Pool for the DHCP Server
Configuration Task List
Complete the following tasks to configure an address pool:
Task
Remarks
Creating a DHCP Address Pool
Required
Configuring manual address allocation
Configuring an Address
Allocation Mode for a
Common Address Pool
Configuring dynamic address allocation
Required to configure
either of the two for the
common address pool
configuration
Configuring Dynamic Address Allocation for an Extended Address
Pool
Required for the extended
address pool configuration
Configuring a Domain Name Suffix for the Client
Configuring DNS Servers for the Client
Configuring WINS Servers and NetBIOS Node Type for the Client
Configuring the BIMS Server Information for the Client
Configuring Gateways for the Client
Configuring Option 184 Parameters for the Client with Voice Service
Configuring the TFTP Server and Bootfile Name for the Client
Configuring Self-Defined DHCP Options
Optional
Creating a DHCP Address Pool
When creating a DHCP address pool, specify it as a common address pool or an extended address
pool.
Follow these steps to create a DHCP address pool:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a DHCP address pool
and enter its view
dhcp server ip-pool
pool-name [ extended ]
Required
No DHCP address pool is
created by default.
A common address pool and an extended address pool are different in address allocation mode
configuration. Configurations of other parameters (such as the domain name suffix and DNS server
address) for them are the same.