H3C LS-3100-52P-OVS-H3 Operation Manual - page 1299
1-3
Follow these steps to apply a QoS policy to traffic of online users:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter user profile view
user-profile profile-name [ dot1x
| portal ]
Required
The configuration made in user
profile view takes effect when
the user-profile is active and
the corresponding users are
online.
Apply the QoS policy
qos apply policy policy-name
{ inbound | outbound }
Required
z
When a user profile is active, you cannot configure or remove the QoS policy applied to it.
z
The QoS policies applied in user profile view support only the remark, car, and filter actions.
z
Do not apply an empty QoS policy in user profile view, because even if you can do that, the user
profile cannot be activated.
Enabling a User Profile
A created user profile takes effect only after being enabled.
Follow these steps to enable a user profile:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable a user profile
user-profile profile-name
enable
Required
A user profile is disabled by default.
z
Only an enabled user profile can be used by a user. You cannot modify or remove the configuration
items in a user profile until the user profile is disabled.
z
Disabling a user profile logs out the users using the user profile.
Displaying and Maintaining User Profile
To do…
Use the command…
Display information about all the created user profiles
display user-profile