H3C LS-3100-52P-OVS-H3 Operation Manual - page 1193
1-5
Follow these steps to configure IPv6 MBGP route summarization:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 MBGP address
family view
ipv6-family multicast
—
Configure manual route
summarization
aggregate ipv6-address prefix-length
[ as-set | attribute-policy
route-policy-name | detail-suppressed |
origin-policy route-policy-name |
suppress-policy route-policy-name ]*
Required
Not configured by
default.
Advertising a Default Route to a Peer or Peer Group
Follow these steps to advertise a default route to a peer or peer group
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 MBGP address
family view
ipv6-family multicast
—
Advertise a default route to an
IPv6 MBGP peer or peer group
peer { ipv6-group-name | ipv6-address }
default-route-advertise [ route-policy
route-policy-name ]
Required
Not advertised by
default
With the peer default-route-advertise command executed, the router sends a default route with the
next hop being itself to the specified IPv6 MBGP peer/peer group, regardless of whether the default
route is available in the routing table.
Configure Outbound IPv6 MBGP Route Filtering
Follow these steps to configure outbound IPv6 MBGP route filtering:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 MBGP address
family view
ipv6-family multicast
—