H3C LS-3100-52P-OVS-H3 Operation Manual - page 196
1-12
To do...
Use the command...
Remarks
Map the original CVLAN and the new SVLAN
to the new CVLAN by associating the traffic
class with the traffic behavior
classifier tcl-name behavior
behavior-name
Required
Exit to system view
quit
—
Table 1-5 Configure an uplink policy for the downlink port
To do...
Use the command...
Remarks
Enter system view
system-view
—
Create a class and enter class view
traffic classifier tcl-name [ operator
{ and | or } ]
Required
Specify the original CVLAN for the
VLAN mapping
if-match customer-vlan-id
vlan-id-value
Required
Specify the original SVLAN for the
VLAN mapping
if-match service-vlan-id vlan-id-value
Required
Exit to system view
quit
—
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name
Required
Specify the new SVLAN used for
replacing the original SVLAN
remark service-vlan-id vlan-id-value
Required
Exit to system view
quit
—
Create a QoS policy and enter QoS
policy view
qos policy policy-name
Required
Map the original SVLAN and CVLAN
to the new SVLAN by associating the
traffic class with the traffic behavior
classifier tcl-name behavior
behavior-name
Required
Exit to system view
quit
—
Table 1-6 Configure a downlink policy for the downlink port
To do...
Use the command...
Remarks
Enter system view
system-view
—
Create a class and enter class view
traffic classifier tcl-name [ operator
{ and | or } ]
Required
Specify the new CVLAN for the VLAN
mapping
if-match customer-vlan-id
vlan-id-value
Required
Specify the new SVLAN for the VLAN
mapping
if-match service-vlan-id vlan-id-value
Required
Exit to system view
quit
—
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name
Required
Specify the original CVLAN used for
replacing the new CVLAN
remark customer-vlan-id vlan-id-value
Required