- DL manuals
- H3C
- Switch
- LS-3100-52P-OVS-H3
- Operation Manual
H3C LS-3100-52P-OVS-H3 Operation Manual - page 1624
Manual is about: S5500-EI Series Ethernet Switches
of
1918
Go
1-12
... Done!
Setting the slave board ...
Slot 2:
Set next configuration file successfully
# Specify file soft-version2.bin as the boot file for the next boot for all members.
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!
# Reboot the device. The software version is upgraded now.