H3C LS-3100-52P-OVS-H3 Operation Manual - page 773
1-4
z
The ipv6 filter-policy export command is usually used in combination with the ipv6 import-route
command. If no protocol is specified for the ipv6 filter-policy export command, routes
redistributed from all routing protocols are filtered before advertisement. If a protocol is specified,
only routes redistributed from the routing protocol are filtered for advertisement.
z
For information about ACL, refer to ACL Configuration in the Security Volume.
z
For information about routing policy and IPv6 prefix list, refer to Routing Policy Configuration in the
IP Routing Volume.
Displaying and Maintaining IPv6 IS-IS
To do…
Use the command…
Remarks
Display brief IPv6 IS-IS
information
display isis brief
Available in any view
Display the status of the debug
switches
display isis debug-switches
{process-id | vpn-instance
vpn-instance-name}
Available in any view
Display IS-IS enabled interface
information
display isis interface [ statistics |
[ interface-type interface-number ]
[ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ]
Available in any view
Display IS-IS license
information
display isis license
Available in any view
Display LSDB information
display isis lsdb [ [ l1 | l2 | level-1 |
level-2 ] | [ [ lsp-id lsp-id | lsp-name
lspname | local] | verbose ] * ] *
[ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display IS-IS mesh group
information
display isis mesh-group [ process-id |
vpn-instance vpn-instance-name ]
Available in any view
Display the mapping table
between the host name and
system ID
display isis name-table [ process-id|
vpn-instance vpn-instance-name ]
Available in any view
Display IS-IS neighbor
information
display isis peer [ verbose |
statistics ] [ process-id | vpn-instance
vpn-instance-name ]
Available in any view
Display IPv6 IS-IS routing
information
display isis route ipv6 [ [ level-1 |
level-2 ] | verbose ] * [ process-id ]
Available in any view
Display SPF log information
display isis spf-log [ process-id|
vpn-instance vpn-instance-name ]
Available in any view
Display the statistics of the
IS-IS process
display isis statistics [ level-1 |
level-2 | level-1-2 ] [ process-id |
vpn-instance vpn-instance-name ]
Available in any view
Clear all IS-IS data structure
information
reset isis all [process-id|
vpn-instance vpn-instance-name]
Available in user view