H3C LS-3100-52P-OVS-H3 Operation Manual - page 1551
Manual is about: S5500-EI Series Ethernet Switches
of
1918
2-2
Setting Up the Connection to the Console Port
z
Connect the serial port of your PC/terminal to the Console port of the switch, as shown in
Figure
2-1
.
Figure 2-1 Diagram for setting the connection to the Console port
z
If you use a PC to connect to the Console port, launch a terminal emulation utility (such as Terminal
in Windows 3.X or HyperTerminal in Windows 9X/Windows 2000/Windows XP) and perform the
configuration shown in
Figure 2-2
through
Figure 2-4
for the connection to be created. Normally,
the parameters of a terminal are configured as those listed in
Table 2-1
.
Figure 2-2 Create a connection
Figure 2-3 Specify the port used to establish the connection