H3C LS-3100-52P-OVS-H3 Operation Manual - page 1738
1-2
At present, the detection modules that can collaborate with the Track module include the Network
Quality Analyzer (NQA) and the Bidirectional Forwarding Detection (BFD) module. Refer to NQA
Configuration in the System Volume for details of NQA and BFD Configuration in the IP Routing Volume
for details of BFD.
Collaboration Between the Track Module and the Application Modules
You can establish the collaboration between the Track module and the application modules through
configuration. If the status of the Track object changes, the Track module tells the application modules
to deal with the change accordingly.
At present, the application modules that can collaborate with the Track module include:
z
VRRP
z
Static routing
Track Configuration Task List
To implement the collaboration function, you need to establish collaboration between the Track module
and the detection modules, and between the Track module and the application modules.
Complete these tasks to configure Track module:
Task
Remarks
Configuring Track-NQA Collaboration
Configuring Collaboration
Between the Track
Module and the Detection
Modules
Configuring Track-BFD Collaboration
Use either approach
Configuring Track-VRRP Collaboration
Configuring Collaboration
Between the Track
Module and the
Application Modules
Configuring Track-Static Routing Collaboration
Use at least one of
the two approaches
Configuring Collaboration Between the Track Module and the
Detection Modules
Configuring Track-NQA Collaboration
Through the following configuration, you can establish the collaboration between the Track module and
the NQA, which probes the link status and informs the Track module of the probe result.
Follow these steps to configure Track-NQA collaboration:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a Track object and
associate it with the specified
Reaction entry of the NQA test
group
track track-entry-number nqa
entry admin-name
operation-tag reaction
item-num
Required
No Track object is created by
default.