H3C LS-3100-52P-OVS-H3 Operation Manual - page 568
1-30
To do…
Use the command…
Remarks
Enter system view
system-view —
Enter OSPF view
ospf [process-id | router-id router-id |
vpn-instance instance-name ] *
—
Configure the
maximum number of
OSPF routes
maximum-routes { external | inter |
intra } number
Optional
By default, the maximum number
of AS external routes, inter-area
routes and intra-area routes is
12288, 10240 and 1024,
respectively.
Configuring the Maximum Number of Load-balanced Routes
If several routes with the same cost to the same destination are available, configuring them as
load-balanced routes can improve link utilization.
Follow these steps to configure the maximum number of load-balanced routes:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter OSPF view
ospf [process-id | router-id router-id |
vpn-instance instance-name ] *
—
Configure the maximum
number of equivalent
load-balanced routes
maximum load-balancing maximum
Optional
The default number is 4.
Configuring a Priority for OSPF
A router may run multiple routing protocols, and it sets a priority for each protocol. When a route found
by several routing protocols, the route found by the protocol with the highest priority will be selected.
Follow these steps to configure a priority for OSPF:
To do…
Use the command…
Remarks
Enter system view
system-view —
Enter OSPF view
ospf [process-id | router-id
router-id | vpn-instance
instance-name ] *
—
Configure a priority for
OSPF
preference [ ase ] [ route-policy
route-policy-name ] value
Optional
The priority of OSPF internal routes
defaults to 10.
The priority of OSPF external routes
defaults to 150.