H3C LS-3100-52P-OVS-H3 Operation Manual - page 879
2-12
To do…
Use the command…
Remarks
Display information about
BGP VPNv4 peers
display bgp vpnv4 vpn-instance
vpn-instance-name peer [ group-name
log-info | ip-address { log-info | verbose }
| verbose ]
Available in any view
Display the BGP VPNv4
routing information of a
specified VPN instance
display bgp vpnv4 vpn-instance
vpn-instance-name routing-table
[ network-address [{ mask | mask-length }
[ longer-prefixes ] ] | as-path-acl
as-path-acl-number | cidr | community
[aa:nn ]&<1-13>[no-export-subconfed |
no-advertise | no-export ]*
[ whole-match ] | community-list
{ basic-community-list-number
[ whole-match ] |
adv-community-list-number }&<1-16> |
dampened | dampening parameter |
different-origin-as | flap-info
[ as-path-acl as-path-acl-number |
network-address [ mask [ longer-match ] |
mask-length [ longer-match ] ] |
regular-expression
as-regular-expression ]| peer ip-address
{ advertised-routes | received-routes } |
regular-expression as-regular-expression
| statistic ]
Available in any view
Perform a soft reset of the
BGP connections in a
specified VPN instance
refresh bgp vpn-instance
vpn-instance-name { ip-address|all |
external | group group-name } { export |
import }
Available in user view
Reset the BGP
connections of a VPN
instance
reset bgp vpn-instance
vpn-instance-name { as-number |
ip-address | all | external | group
group-name }
Available in user view
Clear the route flap
dampening information of
a VPN instance
reset bgp vpn-instance
vpn-instance-name dampening
[ network-address [ mask | mask-length ] ]
Available in user view
Clear route flap history
information about a BGP
peer of a VPN instance
reset bgp vpn-instance
vpn-instance-name ip-address flap-info
reset bgp vpn-instance
vpn-instance-name flap-info [ ip-address
[ mask | mask-length ] | as-path-acl
as-path-acl-number | regexp
as-path-regexp ]
Available in user view
The above table lists only the commands used to display VPN instance-related information is displayed.
For information about the commands used to display routing protocol configuration, see relevant
chapters in the IPv4 Routing module of this manual.