H3C LS-3100-52P-OVS-H3 Operation Manual - page 1660
3-6
z
Download application file newest.bin from PC to the root directory of the storage medium on the
master.
z
Download application file newest.bin from PC to the root directory of the storage medium on a
slave (with the member ID 2).
# Upload a configuration file config.cfg to the TFTP server.
# Specify newest.bin as the main startup file to be used at the next startup for all the member devices.
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!
# Reboot the device and the software is upgraded.
The startup file used for the next startup must be saved under the root directory of the storage medium.
You can copy or move a file to the root directory of the storage medium. For the details of the
boot-loader command, refer to Device Management Commands in the System Volume.