H3C LS-3100-52P-OVS-H3 Operation Manual - Management System
4-1
4
Logging in Through Web-based Network
Management System
Introduction
An S5500-EI series switch has a Web server built in. You can log in to an S5500-EI series switch
through a Web browser and manage and maintain the switch intuitively by interacting with the built-in
Web server.
To log in to an S5500-EI series switch through the built-in Web-based network management system,
you need to perform the related configuration on both the switch and the PC operating as the network
management terminal.
Table 4-1 Requirements for logging in to a switch through the Web-based network management
system
Item
Requirement
Start the Web server
The IP address of the management VLAN of the switch is configured.
The route between the switch and the network management terminal
is available. (Refer to the module “IP Addressing and Performance”
and “IP Routing” for more.)
Switch
The user name and password for logging in to the Web-based
network management system are configured.
IE is available.
PC operating as the
network management
terminal
The IP address of the management VLAN interface of the switch is
available.
HTTP Connection Establishment
Step 1: Log in to the switch through the console port and assign an IP address to the management
VLAN interface of the switch. By default, VLAN 1 is the management VLAN.
z
Connect to the console port. Refer to section
Setting Up the Connection to the Console Port
.
z
Execute the following commands in the terminal window to assign an IP address to the
management VLAN interface of the switch.
# Configure the IP address of the management VLAN interface to be 10.153.17.82 with the mask
255.255.255.0.
[H3C] interface vlan-interface 1
[H3C-Vlan-interface1] ip address 10.153.17.82 255.255.255.0
Step 2: Configure the user name and the password for the Web-based network management system.
# Configure the user name to be admin.