H3C LS-3100-52P-OVS-H3 Operation Manual - page 643
1-33
Enabling the Logging of Neighbor State Changes
Follow these steps to enable the logging of neighbor state changes:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
––
Enable the logging of neighbor
state changes
log-peer-change
Required
Enabled by default
With this feature enabled, the router delivers information about neighbor state changes to the terminal
for display.
Enabling IS-IS SNMP Trap
Follow these steps to enable IS-IS SNMP trap:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
––
Enable SNMP trap
is-snmp-traps enable
Required
Enabled by default
Binding an IS-IS Process with MIBs
Follow these steps to bind an IS-IS process with MIBs:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter IS-IS view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
—
Bind the IS-IS process
with MIBs
isis mib-binding process-id
Required
By default, MIBs are bound with
IS-IS process 1.