D-Link DES-3250TG Command Line Interface Reference Manual - page 110
Manual is about: Layer 2 Switch
of
322
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
110
show packet ports
Purpose
Used to display statistics about the packets sent
and received by the switch.
Syntax
show packet ports
Description
This command is used to display statistics about
packets sent and received by ports specified in
the port list.
Parameters
− Specifies a range of ports to be
configured. The port list is specified by listing
the beginning port number and the highest port
number of the range. The beginning and end of
the port list range are separated by a dash. For
example, 3 would specify port 3. 4 specifies port
4. 3-4specifies all of the ports between port 3
and port 4
− in numerical order.
Restrictions None.