D-Link DES-3250TG Command Line Interface Reference Manual - page 278
DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
278
create access_profile
vlan
− Specifies that the switch will examine the
VLAN part of each packet header.
source_mac
− Specifies a MAC
address mask for the source MAC address. This
mask is entered in the following hexadecimal
format,
destination_mac
− Specifies a
MAC address mask for the destination MAC
address.
802.1p
− Specifies that the switch will examine
the 802.1p priority value in the frame’s header.
ethernet_type
− Specifies that the switch will
examine the Ethernet type value in each frame’s
header.
ip
− Specifies that the switch will examine the IP
address in each frame’s header.
vlan
− Specifies a VLAN mask.
source_ip_mask
− Specifies an IP
address mask for the source IP address.
destination_ip_mask
− Specifies an
IP address mask for the destination IP address.
dscp
− Specifies that the switch will examine the
DiffServ Code Point (DSCP) field in each
frame’s header.
icmp
− Specifies that the switch will examine the
Internet Control Message Protocol (ICMP) field
in each frame’s header.
type
− Specifies that the switch will examine
each frame’s ICMP Type field.
code
− Specifies that the switch will examine
each frame’s ICMP Code field.